matlab/simulink-agentic-toolkit.

author-modeladvisor-checks

>

authoring-simulink-inputs

>

building-architecture-models

Common steps for building multi-layer system architecture models using System Composer. Use when implementing architecture models or when interacting with interface dictionaries, allocation sets, stereotypes, and requirements for architecture components.

building-simulink-models

Builds and edits Simulink, System Composer, Stateflow, and Simscape models. Use when modifying model structure, parameters, ports, connections, or Stateflow chart internals.

checking-model-compliance

Use this skill when the user asks to check Simulink model compliance against a standard (MISRA, MAB, JMAAB, ISO 26262, ISO 25119, DO-178C, DO-254, IEC 61508, IEC 62304, EN 50128, CERT C/CWE, AUTOSAR), wants to run Model Advisor checks, or needs a compliance report with fix suggestions. For JMAAB/MAB, supplement deterministic checks with agentic review of uncheckable guidelines.

configuring-block-policy

Guide users through creating and managing .satk/block-policy.json for controlling which blocks the agent can use, which are excluded, and which block parameters the agent should not modify. Use when setting up block usage policy for a project.

create-sdi-run

>

curating-library-kg

Guide users through curating the library knowledge index — reviewing block categories, marking common/important blocks, and improving block descriptions for better agent block selection.

filing-bug-reports

Generate a standalone bug report that another developer can use to reproduce, investigate, and fix an issue. Use when the user says 'file a bug', 'write a bug report', 'report this issue', or asks to document a defect for handoff.

generate-requirement-drafts

Generates draft requirements from Simulink models. Use when drafting or updating requirement artifacts from a model. Prefers Requirements Toolbox (.slreqx) when available; falls back to structured YAML.

inject-faults

Add, configure, and manage faults on Simulink, Simscape, and System Composer model signals for robustness analysis and safety validation. Use when injecting faults (stuck, noise, gain, offset) onto block inports/outports, enabling fault simulation, or analyzing fault effects. Covers sensor failures, signal corruptions, actuator faults, FMEA validation, and robustness testing. Requires Simulink Fault Analyzer.

manage-safety-analysis

Create, populate, and manage safety analysis spreadsheets (FMEA, FHA, HARA, custom) and fault trees (FTA) in Safety Analysis Manager. Use when the user asks to perform FMEA, hazard analysis, fault tree analysis, safety analysis, or work with Safety Analysis Manager documents. Requires Simulink Fault Analyzer.

managing-simulink-projects

>-

setup-custom-libraries

Declare, add, or update custom Simulink block libraries and configure block policy and knowledge index. Use when a user wants to register, set up, configure, or add new files to their custom libraries for agent-assisted model building.

simulating-simulink-models

Runs Simulink models programmatically for data exploration, parameter sweeps, and custom analysis using sim() with SimulationInput/SimulationOutput. Use when calling sim(), parsim, setExternalInput, setModelParameter, setVariable, or accessing logsout — any task producing simulation results for analysis (not pass/fail tests).

simulink-single-precision-conversion

Converts a double-precision Simulink system or subsystem to single precision using DataTypeWorkflow.Single (Fixed-Point Designer). The single conversion replaces all user-specified double-precision data types, as well as output data types that compile to double precision, with single-precision data types. Use this skill when converting Simulink systems to single precision, reducing memory usage of a Simulink system, optimizing for embedded targets. Do NOT use for standalone MATLAB .m code single conversion.

specifying-mbd-algorithms

Specify algorithms for Model-Based Design: system specs, architecture specs, implementation plans, test plans. Use when creating specifications for controllers, signal processing, diagnostics, estimators, or other algorithms authored in Simulink, Stateflow, System Composer, or MATLAB Function blocks.

specifying-plant-models

Specify plant models for closed-loop simulation: system specs, architecture, build plans, validation plans. Use when creating, updating, or reviewing plant model specifications, planning plant model architecture, or planning plant model validation.

testing-simulink-models

Creates persistent Gherkin-based pass/fail tests for Simulink models and individual subsystems using model_test. Use when verifying expected behavior, writing regression tests, reproducing issues, or validating bug fixes with structured assertions. Requires Simulink Test.